Kingston DRAM 32GB 3200MHz DDR4 Non-ECC CL22 SODIMM 2Rx8

16GB 2Rx8 2G x 64-Bit PC4-3200
CL22 260-Pin SODIMM

This document describes ValueRAM’s KVR32S22D8/16 is a 2G x
64-bit (16GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM),
2Rx8, non-ECC, memory module, based on sixteen 1G x 8-bit
FBGA components. The SPD is programmed to JEDEC standard
latency DDR4-3200 timing of 22-22-22 at 1.2V. This 260-pin DIMM
uses gold contact fingers. The electrical and mechanical
specifications are as follows:

• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for
 data, strobe, and mask signals
• Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Single-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• 8 internal banks; 2 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8
 via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• PCB: Height 1.18” (30.00mm)
• RoHS Compliant and Halogen-Free  

CL(IDD)    22cycles
Row Cycle Time (tRCmin)     45.75ns(min.)

Refresh to Active/Refresh    350ns(min.)
Command Time (tRFCmin)

Row Active Time (tRASmin)   32ns(min.)
UL Rating     94 V – 0
Operating Temperature      0o
C to +85o
C
Storage Temperature      -55o
C to +100o
C